MIL-DTL-29384B(MC)
Agency's automated packaging files, CD-ROM products, or by
contacting the responsible packaging activity.
6.
NOTES
(This section contains information of a general or explanatory nature that may be helpful,
but is not mandatory.)
6.1. Intended use. The vest covered by this specification is
intended for wear, by U.S. Marine Corps women general officers,
with the evening dress uniform.
6.2. Acquisition requirements.
Acquisition documents must
specify the following:
a.
Title, number, and date of the specification.
b.
Issue of DoDISS to be cited in the solicitation, and if
required, the specific issue of individual documents referenced
(see 2.2).
c.
Packaging requirements (see 5.1).
d.
Size required (see 1.2).
e.
When first article is not required (see 3.2 and 4.3).
6.3. Standard sample. The standard sample and color sample may
be obtained from the procuring activity or as directed by the
contracting officer.
6.4. Figures. Figures 1 through 3 show general design of the
vest and are furnished for information only. In the event of
conflict between these figures and the text of this
specification, the text of this specification will govern.
6.5. Fusing conditions. Specific machine setting should be
obtained from the supplier of the particular fusible material for
optimum results. The following fusing conditions include the
recommendations of several suppliers of fusible material and are
furnished for guidance only:
Temperature between pressing surfaces of 300oF minimum
a.
and 320oF maximum, at the fuseline (not the temperature at the
clock).
b.
Pressure between pressing surfaces of 6 pounds force
per square inch (1bf/in2) minimum and 7 lbf/in2 maximum.
c.
Pressing time of 12 seconds minimum and 14 seconds
maximum.
28
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business