MIL-DTL-29384B(MC)
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a. First article inspection (see 4.3).
b. Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the provisions
set forth in ANSI/ASQC Z1.4.
4.3. First article inspection. When first article is required,
inspection shall be made of a completely fabricated vest for all
provisions of this specification.
4.4. Conformance inspection.
4.4.1 Testing of components. Testing of components shall be in
accordance with the applicable subsidiary specifications and
standards to the extent applicable, except that this
specification shall govern in the event of conflict.
4.4.2 In-process inspection. Inspection will be made at any
point or during any phase of the manufacturing process to
determine whether operations or assemblies are performed as
specified herein. The Government reserves the right to exclude
from consideration for acceptance any material or service for
which in-process inspection has indicated nonconformance.
4.4.3 Examination of the end item. The end item shall be
examined for defects listed in 4.4.3.1, 4.4.3.2 and 4.4.3.3.
4.4.3.1. General defects.
General defects shall be classified as
follows:
Classification
Examine
Defects
Major
Minor
Buttonholes
a. One or more omitted or added.
101
and eyelets
b. Wrong type buttonhole or
201
(construction)
eyelet.
19
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business