MIL-DTL-29384B(MC)
4.4.3.2. Detailed defects applicable to specific parts.
Detailed
defects shall be classified as follows:
Classification
Examine
Defects
Major
Minor
Alignment and
Outside of vest:
position of
a. Buttonhole on right front not
254
buttonholes
in same horizontal position as
and eyelets
eyelet on left front by more than
1/4 inch.
b. Position of front buttonhole
255
from front edge:
Less than 1/4 inch or more than
3/4 inch.
Length of
a. Unbuttoned fronts unequal in
256
front
length by more than 1/2 inch.
Lapels
a. Lapel facings.
1. Twisted, short or tight,
257
causing lapels to curl out,
affecting appearance.
2. Fullness or puckers,
258
affecting appearance.
b. Lapel edges.
1. Bulky, irregular, or not
259
properly forced out, causing
crooked edges, affecting
appearance.
c. Bridle tape.
1. Misplace, not serving
260
intended purpose.
2. Tape partly on creased edge
261
or on lapel side.
Lapels
d. Lapel shape.
(cont'd)
1. Not uniform i.e., left and
262
right top edge of lapels vary in
length by 1/4 inch or more.
2. Lapels poorly shaped or not
263
of uniform size or shape.
25
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business