MIL-DTL-29396B(MC)
Classification
Examine
Defects
Major
Minor
A
B
Sleeves
2. Hang of sleeves on the same
325
(cont'd)
jacket in opposite direction by
more than 2 inches.
3. Sleeve tight in armhole,
326
i.e., roll effect not present.
b. Sleeve lining:
1. Twisted, tight, or short,
128
causing bulge, twist, or
puckering on outside of sleeves.
2. Sleeve lining too long,
327
causing lining to sag at bottom
more than 1/2 inch.
3. Sleeve lining seams out of
328
alignment more than 3/4 inch with
sleeve seams at armholes or at
bottom of sleeve.
c. Construction of sleeves:
1. Tacking on bottom turnup to
264
body of sleeve omitted or
insecure.
2. Sleeve bottom edge uneven
329
by more than 1/4 inch.
3. Tacking on one or both
330
sleeve lining seams to sleeve
seams omitted, or insecure.
4. Bottom edge of sleeve
331
lining turnup less than 1 inch or
more than 1-1/4 inches up from
bottom edge of sleeve.
d. Sleeve cuffs:
1. Piping irregular, affecting
265
appearance.
2. Top edge on top sleeve part
266
poorly shaped, affecting
appearance.
56
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business