MIL-DTL-29396B(MC)
Classification
Examine
Defects
Major
Minor
A
B
Front and
f. Left front rolling outward
280
bottom edges
below bottom button.
(cont'd)
g. Front edge irregular,
281
affecting appearance.
h. Piping tight on bottom edge,
282
causing puckering on outside of
jacket, affecting appearance.
i. Left front not dressed as
283
specified.
a. Short, tight, or twisted
284
Front facings
causing fullness or twists on
fronts, affecting appearance.
Front
a. Position from front edge
buttonholes
including piped edge:
- less than 5/8 inch but not
(position)
339
less than 1/2 inch or more than
3/4 inch but not more than 7/8
inch.
- less than 1/2 inch or more
285
than 7/8 inch.
b. More than 1/4 inch from equal
286
spacing.
c. Unevenly spaced from front
287
edge by more than 3/16 inch.
d. Top buttonhole less than 7/8
288
inch or more than 1-1/8 inches
from top edge of piping (collar
notch).
Front eyelets
a. Out of vertical alignment by
289
(position)
1/4 inch or more.
b. Center of one or more eyelets
positioned from right front edge:
340
- less than 2 inches but not
less than 1-3/4 inches or more
than 2-1/4 inches but not more
than 2-1/2 inches.
290
- less than 1-3/4 inches or
more than 2-3/8 inches.
59
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business