MIL-DTL-29478A(MC)
Classification
Examine
Defects
Major
Minor
A
B
Sleeves
2. Backarm seam of sleeve
(cont'd)
not matching side back seam by:
- more than 1/4 inch but
276
not more than 1/2 inch.
- more than 1/2 inch.
132
3. Hang of sleeves on the
333
same coat in opposite direction
by more than 2 inches.
4. Sleeve tight in armhole,
334
i.e., roll effect not present.
b. Sleeve lining:
1. Twisted, tight, or short,
133
causing bulge, twist, or
puckering on outside of
sleeves.
2. Sleeve lining too long,
335
causing lining to sag at bottom
more than 1/2 inch.
3. Sleeve lining seams out
336
of alignment more than 3/4 inch
with sleeve seams at armholes
or at bottom of sleeve.
c. Construction of sleeves:
1. Tacking on bottom turnup
277
to body of sleeve omitted or
insecure.
2. Sleeve bottom edge uneven
337
by more than 1/4 inch.
3. Tacking on one or both
338
sleeve lining seams to sleeve
seams omitted, or insecure.
4. Bottom edge of sleeve
339
lining turnup less than 1 inch
or more than 1-1/4 inches up
from bottom edge of sleeve.
64
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business