MIL-DTL-29478A(MC)
Classification
Examine
Defects
Major
Minor
A
B
Sleeves
9. Point of cuff not
286
(cont'd)
centered between the folded
forearm edge and the folded
backarm edge of sleeves by more
than 1/4 inch.
a. Horizontal alignment of
343
Position of
eyelet on one sleeve cuff not
eyelets on
uniform with other sleeve cuff
sleeve cuffs
by more than 1/4 inch.
b. Eyelet on one or both sleeve
344
cuffs out of vertical alignment
by more than 1/8 inch.
Body (outside)
a. Fitting of body linings:
1. Tight, short, or twisted,
134
causing fullness or twist on
outside of coat, affecting
appearance.
b. Fitting of front
interlining:
1. Tight, short, or twisted,
135
causing fullness or twist on
outside of coat, affecting
appearance.
2. Too full, causing coat
136
front to have a wavy
appearance.
Center front,
a. One or more joining seams
287
side body, and not spread open and pressed
side back panel flat.
seams
b. Curved side back panel seam
288
stretched or distorted,
affecting appearance
Center back
a. Joined seams below waist
289
line not pressed flat and
towards the center of back.
Center back
b. Piping at back edge of skirt
290
(cont'd)
set on tight, causing puckering
on back, affecting appearance.
66
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business