A-A-55210A
1-3/4 ( + 1/8) inches wide utilizing a commercial type lining assembly and a hook and eye closure. The
slack shall have two (2) uncut front waist darts and four (4) uncut back waist darts. The slack shall
have five (5) belt loops for sizes up to and including size 12, and seven (7) for size 14 and above (see
figure 1); and shall measure 5/8 to 3/4 inches wide with a 1-3/4 (+ -1/8) inch opening (see figure 2); a
"J" stitched right front slide fastener fly; two (2) quarter top side pockets with one row 1/16 inch
edgestitch and shall have a 5-3/8 to 5-5/8 inch opening bartacked at both opening ends. The slack shall
have two (2) double welt (1/8 to 3/16) hip pockets and shall measure 5-1/4 (+ 1/8) inches wide and
bartacked vertically at both ends, and 6-1/4 (+ 1/4) inches in depth, with a button and 5/8 to 3/4 inch
vertical buttonhole worked over gimp centered 3/16 to 5/16 inch below the lower welt seam on left
pocket. The slack shall be pressed smooth at the top including the fly and the legs shall be creased in
the center with the seam matching at the bottom and in the crotch.
3.2 MATERIAL.
3.2.1 Basic material. The basic material shall be a 65% polyester/35% cotton twill in accordance with
CG-CDTO-T-0800. The color shall be Blue 3362.
3.2.2 Pocketing and lining. The cloth for the pockets, waistband lining, and left fly lining shall be
polyester, polyester/cotton, or polyester/rayon twill. The color shall be Black . The cloth shall have a
minimum weight of 4.3 oz/sq. yd and a minimum breaking strength of 72 pounds (warp) and 55 pounds
(filling) when tested as specified in ASTM-D-5034.
3.2.3 Interlining. The material for interlining the waistband shall be a polyester or polyester/cellulose
blend non-woven with a minimum weight of 3.0 oz/sq yd and be equivalent to commercial industry
standards.
3.2.4 Thread. The thread shall be a cotton-covered polyester thread conforming to ticket number 50
or 70, 2 or 3-ply for seaming and stitching, ticket number 50 for bartacks and buttonholes and ticket
number 16 or 24 for button sewing. The color shall be black. The thread shall show "good"
colorfastness to laundering and light when tested in accordance to AATCC 61, Test 3A and AATCC
16 Option A, respectively.
3.2.5 Gimp. The gimp for reinforcing the buttonholes shall conform to Type I or II, size No 8.
The color shall be black. The gimp shall show "good" colorfastness to laundering and light when tested
to AATCC 61, Test 3A and AATCC 16, Option A, respectively.
3.2.6 Button. The button for the left hip pocket shall be flat, 4 hole melamine plastic, 22-line. The
color shall be Black BT, Cable No. 62001 with a glossy finish.
3.2.7 Slide fastener. The slide fastener shall be non-separating, non-reversible cam lock, size light
medium, short tab pull. All metal components of the slide fastener shall be brass and the semi-automatic
pin lock cover and spring shall be stainless steel. A staple bottom stop is
2
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business