A-A-55210A
Hip pocket
2
Left fly lining
1
4. REGULATORY REQUIREMENTS.
4.1 Recycled, recovered, or environmentally preferable materials. Recycled, recovered or
environmentally referable materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and maintenance requirements, and promotes
economically advantageous life cycle costs.
5. PRODUCT CONFORMANCE PROVISIONS
5.1 Product conformance. The products offered shall meet the salient characteristics of this
commercial item description, conform to the producer's own drawings, specifications, standards, and
quality assurance practices, and be the same product that is offered for sale in the commercial market.
The Government reserves the right to require proof of such conformance.
5.2 Defects. Any hole, cut or tear, or needle chew, burn; drill hole, multiple float, open place, knot
slub, misweave, loose yarn, woven in waste, color not as specified; any variation between parts, poor
dye penetration, or dyestreak. Any omitted or poor pressing, any double crease line, any burn or
scorch, gloss or impressions not removed, legs not pressed seam to seam. Any spot
or stain, raw edges, open seams, thread ends not removed, loose or tight tension; any component
not as specified, tight, twisted distorted, pleated, or full. Any component part or operation omitted.
Buttonhole omitted, not as specified type, not finished as specified, or misplaced. Button omitted,
broken, defective, misplaced, not as specified, or insecurely sewn. Hook and eye
damaged, not securely attached causing a bulge, twist, distortion, or pucker. Bartacks missing,
insecure, misplaced, not serving intended purpose, or loose stitch tension. Width of waistband or
waistband lining not as specified, lining exposed on outside, waistband puckered pleated, or excess
fullness. Belt loops omitted, misplaced, not as specified width or length. Length of fly
uneven at top, fly facing exposed beyond front edge, seam joining right fly to front exposed
when fly is closed, right fly stitching irregular. Slide fastener not operable, stitching too close to edge of
chain not permitting slider too pass freely, any cut, tear, or hole in slide fastener tape. Top of pocketing
not securely or evenly inserted under waistband, pocketing caught in unrelated stitching, unfinished seam
on pocketing, hip pocket welt varies in width, dart incomplete or not extending into pocket opening.
Outlet or lining outlet at waistband omitted or
less than specified amount. Any label missing, incorrect, or illegible; bar code label omitted or not
readable by scanner; human-readable interpretation (HRI) omitted or illegible; bar code label not visible
on folded, packaged item; bar code causes damage to the item; any items not packaged in accordance
with the contract or order.
5.3 Acceptance criteria. Acceptance criteria shall be as specified in the contract or purchase order.
6. PACKAGING
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business