A-A-55210A
The paper used for the tags shall have a smooth finish to accept thermal transfer and direct printing. The
tags shall have
a hole and shall be attached to each item by a fastener, clearly legible and readable by a scanner. The
bar coding element shall be a 13 digit national stock number (NSN). There shall be a 12 digit UPC bar
code number assigned for all NSNs by the procuring activity. The initials UPC must appear beneath the
code. The bar code for NSNs and UPC type shall be a medium to high code density and shall be
located so that it is completely visible on the item when it is folded and/or packaged as specified and so
that it causes no damage to the item.
3.4 Seams and stitches. Seaming shall be consistent and exhibit a uniform appearance and shall
conform to ASTM-D-6193 stitch and seam types. All topstitching, and raise stitching shall be sewn
with 12-14 stitches per inch with 301 stitch type. All other seams shall be sewn with 12-14 stitches per
inch with 301 or 401 stitch type, except that the back seam shall be sewn with 8-10 stitches per inch
with a double needle seat seamer 1/32 to 1/64 gage with 401 stitch type. All overedge stitching shall be
6-8 stitches per inch. To maintain durability and functionality, bartacks 3/8 to 5/8 inch in length with
approximately 27 stitches per inch are required at the reinforcement points, top and bottom of side
pocket openings, at the ends of the welt pocket openings, bottom of fly, and belt loops. Buttonholes
shall be eyelet end, taper bar, 5/8 to 3/4 inch length and 52-56 stitches per inch with end securely
tacked. All material edges shall be clean finished. Edges shall be turned-in, turned-under, or serged.
3.5 Sizes and measurements. The finished measurements of the slacks shall conform to Table I. All
measurements and tolerance are expressed in inches, and shall be taken without pulling or stretching the
slacks.
TABLE I. Finished measurements
Inseam Unhemmed (C)
Leg (E)
Size Waist (A)
Hips (B
S
R
L
XL
Knee (D)
Bottom
6
23-1/2
36
32
34
36
38
18-3/4
18-3/4
8
24-1/2
37
32
34
36
38
19
19
10
25-1/2
38
32
34
36
38
19-1/4
19-1/4
12
27
39-1/2
32
34
36
38
19-1/2
19-1/2
14
28-1/2
41
32
34
36
38
19-3/4
19-3/4
16
30
42-1/2
32
34
36
38
20
20
18
32
44-1/2
32
34
36
38
20-1/4
20-1/4
20
34
46-1/2
32
34
36
38
20-1/2
20-1/2
22
36
48-1/2
32
34
36
38
20-3/4
20-3/4
Tol.
+ 1/2
+ 1/2
+ 1/2
+ 1/2
+ 1/2
+ 1/2
+ 1/2
+ 1/2
4
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business