MIL-DTL-29396B(MC)
3.3.13 Gimp. The buttonhole gimp shall be cotton, ticket No. 8,
soft or glazed finish, conforming to type I or II of A-A-50198.
The color of the gimp shall be scarlet, shade W, cable No. 66040
and shall show good fastness to wet (dry) cleaning.
3.3.14 Buttons.
3.3.14.1.Insignia buttons. The insignia buttons shall be metal,
gold plated, 27-line for shoulder straps, sleeves and 40-line for
front closure conforming to type I, style 3, class A, subclass 1
of MIL-DTL-3461.
3.3.14.2.Ring toggles. Ring toggles for securing buttons to
fronts and sleeves shall conform to MIL-DTL-3461.
3.3.15 Collar closure hook and eye. The hook and eye for closing
the collar shall be brass, black, japanned finished or black
chemical finish, followed by a clear lacquer coating and conform
to the requirements of Figure 4.
3.3.16 Labels. Each jacket shall have a combination instruction/
identification label and a size label as follows. The jacket is
intended to be dry cleaned and the labels shall show fastness to
dry cleaning.
3.3.16.1.Combination identification/instruction label. The
combination identification/instruction label instruction shall
conform to type VI, classes 1 and 10 (combined), of DDD-L-20
except all printing and the space between the lines of printing
shall be minimum 10 point (approximately 1/8 inch). The content
and format shall be as follows:
Collar size:
Nomenclature: (item description)
Contract number:
Name of contractor:
Wool Products Act information:
3.3.16.2.Size label. The size label shall conform to type VI,
class 2 of DDD-L-20. The label shall consist of the numerical
size designation specified in 1.2 followed by the letter S, R, or
L, for Short, Regular and Long, as shown by the following
example:
14R
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business