MIL-DTL-29397B(MC)
Classification
Examine
Defects
Major
Minor
A
B
1. Irregular, i.e., unevenly
233
gaged, or various stitchings not
uniform, affecting appearance.
2. Beyond range of width
314
specified or varies more than
1/16 inch when no range is
specified.
c. Open seams:
1. On outside:
315
- up to 1/4
inch inclusive.
234
- more than
1/4 inch but
not more than 1/2
inch.
122
- more than
1/2 inch.
2. On inside:
235
- more than 1/2 inch
(except machine felling).
- up to 1/2 inch inclusive
316
(except machine felling).
- up to 1 inch inclusive
317
(machine felling).
- more than 1 inch (machine
236
felling).
NOTE:
One or more broken stitches or two or more continuous
skipped or run-off stitches constitute an open seam.
Seams and
d. Raw edges:
stitching
1. On outside:
(cont'd)
318
- up to 1/8
inch inclusive.
237
- more than
1/8 inch but
not more than 1/4
inch.
123
- more than
1/4 inch.
2. On inside:
- more than 1/8 inch but
319
not more than 1/4 inch.
- more than 1/4 inch.
238
NOTE:
Raw edges shall be classified as such when they occur at
places where an edge is required to be turned under.
Raw edges not caught in stitching shall be classified as
an open seam.
56
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business