MIL-DTL-29397B(MC)
Classification
Examine
Defects
Major
Minor
A
B
Sleeves
2. Hang of sleeves on the same
333
(cont'd)
jacket in opposite direction by
more than 2 inches.
3. Sleeve tight in armhole,
334
i.e., roll effect not present.
b. Sleeve lining:
1. Twisted, tight, or short,
132
causing bulge, twist, or
puckering on outside of sleeves.
2. Sleeve lining too long,
335
causing lining to sag at bottom
more than 1/2 inch.
3. Sleeve lining seams out of
336
alignment more than 3/4 inch with
sleeve seams at armholes or at
bottom of sleeve.
c. Construction of sleeves:
1. Tacking on bottom turnup to
278
body of sleeve omitted or
insecure.
2. Sleeve bottom edge uneven
337
by more than 1/4 inch.
3. Tacking on one or both
338
sleeve lining seams to sleeve
seams omitted, or insecure.
4. Bottom edge of sleeve
339
lining turnup less than 1 inch or
more than 1-1/4 inches up from
bottom edge of sleeve.
d. Sleeve cuffs:
1. Piping irregular, affecting
279
appearance.
Sleeves
2. Top edge on top sleeve part
280
(cont'd)
poorly shaped, affecting
appearance.
63
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business