MIL-DTL-29397B(MC)
Classification
Examine
Defects
Major
Minor
A
B
3. Height of pointed end on
281
both sleeves varying in length by
more than 1/4 inch.
4. Sleeve puckered at joining
282
of cuff, affecting appearance.
5. Cuff puckered or twisted at
283
joining to sleeve, affecting
appearance.
6. Ends of cuff staggered at
backarm seam:
- 1/8 inch or more but not
340
more than 1/4 inch.
- more than 1/4 inch.
284
7. Height of cuff at point on
top sleeve including piping:
341
- less than 4-3/4 inches
but not less than 4-1/2 or more
than 5-1/4 inches but not more
than 5-1/2 inches.
285
- less than 4-1/2 inches or
more than 5-1/2 inches.
8. Height of cuff at backarm
or front creased edges including
piping:
- less than 2-3/4 inches
342
but not less than 2-1/2 inches or
more than 3-1/4 inches but not
more than 3-1/2 inches.
286
- less than 2-1/2 inches or
more than 3-1/2 inches.
9. Point of cuff not centered
343
between the lower forearm folded
edge and the folded backarm edge
of sleeves by more than 1/4 inch.
Position of
a. Horizontal alignment of eyelet
344
eyelets on
on one sleeve cuff not uniform
sleeve cuffs
with other sleeve cuff by more
than 1/4 inch.
64
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business