MIL-DTL-29397B(MC)
Classification
Examine
Defects
Major
Minor
A
B
Metal eyelets
a. Any omitted or added.
222a
for collars
b. Defective eyelets (but
securely clinched):
368
- one eyelet.
223a
- two or more eyelets.
c. Not properly clinched, i.e.,
loose or raw edges of material
exposed around edge of eyelet on
outside of cap:
224a
- one eyelet.
138
- two or more eyelets.
d. Not specified type or size.
225a
e. Position less than 1-1/4
369
inches or more than 1-3/4 inches
from center of eyelet to top edge
of outside band.
f. Color and finish:
- Does not compare favorably
370
with standard or approved sample.
- Surfaces not smooth.
371
- Discoloration of stain
clearly noticeable.
372
- Abraded, scuffed, scratched,
373
or otherwise damaged.
4.4.3.4. Finished measurements. Any measurement deviating from
the nominal dimensions and tolerance specified in Table II shall
be classified as a size measurement defect. Sleeve lengths
uneven by 1/2 inch or more shall be classified as a size
measurement defect.
4.5. Tests.
4.5.1
Lacquer tests.
4.5.1.1. Liver of sulfur. The samples to be tested shall be
immersed in a two percent by weight chemically pure liver of
sulfur (potassium sulphide) water solution, at a temperature of
100°F, for not less than three minutes. The samples shall then
70
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business