MIL-DTL-29397B(MC)
Classification
Examine
Defects
Major
Minor
A
B
f. Left front rolling outward
294
below bottom button.
g. Front edge irregular,
295
affecting appearance.
h. Piping tight on bottom edge,
296
causing puckering on outside of
jacket, affecting appearance.
i. Left front not dressed as
297
specified.
a. Position from front edge
Front
including piped edge:
buttonholes
- less than 5/8 inch but not
347
(position)
less than 1/2 inch or more than
3/4 inch but not more than 7/8
inch.
298
- less than 1/2 inch or more
than 7/8 inch.
b. More than 1/4 inch from equal
299
spacing.
c. Unevenly spaced from front
201a
edge by more than 3/16 inch.
d. Top buttonhole less than 7/8
202a
inch or more than 1-1/8 inches
from top edge of piping (collar
notch).
Front eyelets
a. Out of vertical alignment by
203a
(position)
1/4 inch or more.
Front eyelets
b. Center of one or more eyelets
(position)
positioned from right front edge:
348
(cont'd)
- less than 2 inches but not
less than 1-3/4 inches or more
than 2-1/4 inches but not more
than 2-1/2 inches.
204a
- less than 1-3/4 inches or
more than 2-3/8 inches.
66
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business