MIL-DTL-29395B(MC)
a.
Class 1. Blue, shade BV, cable No. 62003.
Class 2 and 3. White, shade BA, cable No. 62031.
b.
NOTE:
See DoD Standard Shades for Buttons 1966.
3.3.8 Slide fasteners. The slide fasteners shall conform to
either 3.3.8.1 or 3.3.8.2.
3.3.8.1. Metal. The slide fasteners shall conform to type I,
style 3, short tab pull, cam lock size LS (commercial No. 4), of
V-F-106, except that the salt spray test shall not be required.
All the components of the slide fastener shall be brass and from
the same supplier. The tape shall be cotton or synthetic or a
combination. The length of the slide fastener shall start at
the notch and finish at the raw edge at the waist.
3.3.8.2. Plastic coil. The slide fastener shall be manufactured
of polyester or nylon consisting of an automatic or cam lock and
shall be equal to commercial size No. 2. The tape shall be a
blend of nylon and cotton or polyester and cotton or polyester.
The length of the slide fastener shall start at the notch and
finish at the raw edge at the waist.
3.3.8.3. Color.
The color of the slide fastener tape shall be
as follows:
a.
Class 1. Blue, shade AA, cable No. 66527.
b.
Class 2 and 3. White, shade C, cable No. 66503.
3.3.8.4. Colorfastness. The dyed slide fastener tape shall show
colorfastness to laundering equal to or better than the standard
sample when tested as specified in V-F-106. When a standard
sample is not available, the tape shall show "good"
colorfastness when tested as specified in V-F-106.
3.3.9 Combination label. Each pair of slacks shall have a
combination identification, and instruction label conforming to
type VI, classes 1 and 3 of DDD-L-20. The slacks are intended
to be dry cleaned and the labels shall show fastness to dry
cleaning. The inscription shall be as follows:
SLACKS, WOMEN'S - MUSICIAN'S
Fiber content:
Name of contractor:
DRY CLEAN ONLY
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business