MIL-DTL-29395B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
12 Attach hip pocket, flaps and label.
(cont'd)
a. Position pocket flaps on the
301
LSg-2
12-16
50/3
50/3
outside of the back in line with the
(a)
mark as indicated by pattern, with
the pocketing on the under side.
Stitch through all plies 3/16 to 1/4
inch from the mark.
b. Position the hip pocket cord on
301
SSe-2
12-16
50/3
50/3
the outside of slacks in line with
(a)
the mark and stitch through all plies
3/16 to 1/4 inch from the mark.
c. Cut pocket opening through the
301
SSe-1
12-16
0 or
0 or
back and pocket simultaneously. The
(shows
50/3
50/3
opening shall not extend beyond the
finished
ends of the flap. Turn the cord
seam)
piece through the opening and raise
stitch, forming a 1/8 to 3/16 inch
cord edge at lower edge of pocket
opening.
d. Turn under the lower raw edge of
301
LSd-1
10-16
50/3
50/3
cord facing and seam pocketing 1/16
or
to 1/8 inch from folded edge. When
301
LSbj-1
10-16
50/3
50/3
cord facing is cut on selvage, the
(selvage)
edge need not be turned under.
e. Turn the pocketing wrong side
301
SSea-2
12-16
50/3
50/3
out, matching notches with pocket
or
(a)
opening, and stitch sides 3/16 to 1/4
401
SSea-2
12-16
50/3
50/3
inch from raw edges. The stitching
may extend across the bottom folded
edge.
f. Turn pocketing, forcing out
301
SSe-2
12-16
50/3
50/3
corners and seamed edges. Fold and
or
(b)
12-16
50/3
50/3
stitch the pocket 1/4 to 3/8 inch
301
OSf-1
from the side edges. Continue to
stitch along the bottom edges. The
stitching may extend across the
bottom folded edge.
g. Turn flap down and raise stitch
301
LSg-2
12-16
0 or
0 or
through all plies, 1/16 inch from
(b)
50/3
50/3
joining seam, closing top of pocket.
(show
finished
seams)
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business