MIL-DTL-29397B(MC)
piping the lower collar edge and ornamental sleeve cuff and 1
inch wide for piping the front and bottom edges of jacket.
3.3.4.1. Vinyl piping. The white vinyl cord for piping the upper
edge of the collar shall be tubular, with 7/16 inch wide welt and
serrated edge.
3.3.5 Cloth, twill or plain weave, polyester or polyester blend.
The stays for armhole and shoulder seams, the collar interlining
and the binding for the neck edge of the front interlining shall
be cut from cloth, twill or plain weave, polyester or polyester
blend, conforming to class 1 of A-A-52106. The cloth shall be
black, shade 2607. The requirements for nonfibrous material and
seam efficiency shall not apply.
3.3.6 Front interlining. The interlining for the fronts and
side front shall be fusible cloth conforming to type V, class 2
of MIL-C-44296.
3.3.7 Collar interlining. The material for interlining the
collar shall be cloth, cotton, buckram, natural color, conforming
to type I of A-A-50186.
3.3.7.1. Plastic. The plastic strip used in the collar
interlining shall be clear plastic pattern stock 0.20 inch thick.
It shall be cut using the cotton buckram pattern.
3.3.8 Jacket fronts.
The jacket fronts shall conform to class 3
of MIL-DTL-82114.
3.3.9 Shoulder pads. The shoulder pads shall conform to the
requirements of type I, class 2 of MIL-P-15064.
3.3.10 Sleeve-head pads.
The sleeve-head pads shall conform to
type IV of MIL-P-15064.
3.3.11 Stay tape. The stay tape for the armholes and waist seam
shall be cotton, 1/4 inch wide, conforming to type II, class 1 of
A-A-52071, except the requirement for nonfibrous material shall
not apply.
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business