MIL-DTL-29397B(MC)
3.3.13 Gimp. The buttonhole gimp shall be cotton, ticket No. 8,
soft or glazed finish, conforming to type I or II of A-A-50198.
The color of the gimp shall be scarlet, shade W, cable No. 66040
and shall show good fastness to wet (dry) cleaning.
3.3.14 Ornamental braid. The ornamental braid for the front of
the jacket shall be mohair, black, tubular, 3/8 ± 1/16 inch wide
conforming to the following:
Plain
Weave
Weight per gross yards, ounce
35
minimum
Picks per inch
9
minimum
Total carriers
16
minimum
Ends per carriers
6
minimum
Breaking strength, pounds
105
minimum
Shrinkage:
- length, percent
2.0 maximum
- width
Not less than the
original width
Colorfastness to:
- wet (dry) cleaning
Good
- light
Good
3.3.15 Buttons.
3.3.15.1.Insignia buttons. The insignia buttons shall be metal,
gold plated, 27-line and 40-line conforming to type I, style 3,
class A, subclass 1 of MIL-DTL-3461.
3.3.15.2.Ring toggles. Ring toggles for securing buttons to
fronts and sleeves shall conform to MIL-DTL-3461.
3.3.16 Collar closure hook and eye. The hook and eye for closing
the collar shall be brass, black, japanned finished or black
chemical finish, followed by a clear lacquer coating and conform
to the requirements of Figure 7.
3.3.17 Labels. Each jacket shall have a combination instruction/
identification label and a size label as follows. The jacket is
intended to be dry cleaned and the labels shall show fastness to
dry cleaning.
3.3.17.1.Combination personal-clothing identification label. The
combination personal-clothing identification label shall conform
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business