MIL-DTL-29477A(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
Join lining back parts.
8
(cont'd)
b. The seam shall be pressed open
503
EFd-1
10-14
70
70
and pinked on each side.
or
504
Join front and back part assemblies.
9
a. The front assembly shall be
placed on the two piece basic fabric
assembly face to face with the face
of the two piece back lining facing
the inside front assembly of the
basic fabric, knit and lower front
lining.
b. Join the front and back part
301
SSa-1
10-14
50
50
assemblies of the skirt at the side
seams with a 5/8 inch seam from the
top of the waist to the bottom of the
knit front.
c. From the bottom of the knit front
to the bottom of the hem, the basic
fabric seams and the lining seams
shall be individually seamed
separately so that in the finished
skirt the lining shall hang free and
independent from the top ply of the
skirt. The seams of both the basic
fabric and lining shall be pressed
open and face each other to the
inside of the skirt when turned.
d. The edges of the basic fabric
503
EFd-1
10-14
50
70
seams shall be overedged stitched and
or
the lining seams shall be pinked.
504
e. The side seams from the top of
the waist to the top of the lower
front panel shall be pressed toward
the back.
f. Turn the back lining over the
entire assembly so that the right
side is facing out.
10 Attach top of lining to top of waist.
a. Attach lining at waist with a 1/4
301
SSa-1
10-1
50
50
inch seam. Attach the top of lining
and
and basic fabric together at the top
503
EFd-1
10-1
50
50
raw edge of waist. Overedge stitch
or
the seam allowance at the waist.
504
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business