MIL-DTL-29477A(MC)
3.7. Finished measurements. The finished skirts shall conform to
the measurements shown in Table II. All measurements and
tolerance are expressed in inches.
Finished measurements. 1/
Table II.
A
B
C
D
Waist 2/
Waist 2/
Hips 3/
Length 4/
Size
relaxed
stretched
(inches)
(inches)
(inches)
(inches)
Extra small
25
32
41
44
Small
26
34
43
44-1/2
Medium
28
38
47
45
Large
30
42
51
45-1/2
Extra large
32
46
55
46
Tolerances:
± 1/2
± 1/2
± 1/2
± 1/2
1/
All measurements shall be taken with skirt smooth and flat.
A, B, C and D refer to Figure 1.
2/
Waist. Twice the measurement taken in center of waistband
from folded edge to folded edge.
3/
Hips. Twice the measurement taken on the skirt 7 inches
down from top edge of waistband from folded edge to folded
edge.
4/
Length. Measurement taken at center back from top edge of
waistband to bottom edge of unhemmed skirt.
3.8. Workmanship. The finished skirts shall conform to the
quality and grade of product established by this specification.
3.9. Recycled, recovered, or environmentally preferable
materials. Recycled, recovered, or environmentally preferable
materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and
maintenance requirements, and promotes economically advantageous
life cycle costs.
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business