MIL-DTL-29477A(MC)
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the test
conditions specified in MIL-STD-1609.
4.3. First article inspection. When first article is required,
inspection shall be made of a completely fabricated skirt for all
provisions of this specification.
4.4. Conformance inspection.
4.4.1 Component and material inspection. Components and
materials shall be inspected and tested in accordance with all
requirements of referenced specifications and standards unless
otherwise excluded, amended, modified, or qualified in this
specification or applicable purchase documents.
4.4.2 Examination of the end item. Samplings and examination of
the end item shall be performed for dress (D) skirts in
accordance with the provisions of MIL-STD-1609.
4.4.3 Dimensional examination. The dimensional examination
provisions for the finished skirts shall be as listed in 3.7 and
as specified in MIL-STD-1609.
5.
PACKAGING
5.1. Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or order (see
6.2). When actual packaging of material is to be performed by
Department of Defense (DoD) personnel, these personnel need to
contact the responsible packaging activity to ascertain requisite
packaging requirements. Packaging requirements are maintained by
the Inventory Control Point's packaging activity within the
Military Department of Defense Agency, or within the Military
Department's Systems Command. Packaging data retrieval is
available from the managing Military Department's or Defense
13
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business