MIL-DTL-29478A(MC)
3.3.15 Ornamental braid. The ornamental braid for the front of
the coats shall be mohair, black, tubular, and 3/8 + 1/16 inches
wide, conforming to the following:
Weave
Plain
Weight per gross yard (ounces)
35 minimum
Picks per inch
9 minimum
Total carriers
16 minimum
Ends per carriers
6 minimum
Breaking strength (pounds)
105 minimum
Shrinkage:
2.0 maximum
- length (percent)
Not less than the
- width (inches)
original width
Colorfastness to:
- wet (dry) cleaning
Good
- light
Good
3.3.16 Buttons.
3.3.16.1.Insignia buttons. The insignia buttons shall be metal,
gold plated, 27-line and 40-line conforming to type I, style 3,
class A, subclass 1 of MIL-DTL-3461.
3.3.16.2.Ring toggles. Ring toggles for securing buttons to
front, back, and sleeves shall conform to MIL-DTL-3461.
3.3.17 Collar closure hook and eye. The hook and eye for closing
the collar shall be brass, black japanned finish or black
chemical finish, followed by a clear lacquer coating and conform
to the requirements of Figure 7.
3.3.18 Collar eyelets. The eyelets for the collar shall be
brass, rolled flange type, with the barrel scored six to eight
scores. The eyelets shall conform to MIL-E-20652, sheet 1A-BE108
and be enameled a black shade.
3.3.19 Labels. Each coat shall have a combination instruction
identification label and size label as detailed in 3.3.19.1 and
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business