MIL-DTL-29478A(MC)
ITEM
PATTERN NOMENCLATURE
NO. OF CUT PARTS
Material:
Cotton, buckram
22
Collar interlining
1
Material:
Mylar plastic
23
Collar interlining
1
Material:
Cloth, twill or plain weave polyester or
polyester blend
24
Collar interlining
1
Material:
Interlining (fusible)
25
Center front
2
26
Side front
2
Material:
Canvas Coat Front - HYMO
2
Center front
27
2
Side front
28
Material:
Hair cloth
29
Chest piece
2
Marker
30
Cuff and eyelet marker
31
Button and buttonhole marker
3.6. Construction.
3.6.1 Manufacturing requirements. The coats shall be
manufactured in accordance with the operations and the stitch,
seam, and stitching types specified in Table I. The contractor
is not required to follow the exact sequence of the operations as
listed in Table I, but all operations specified shall be used to
manufacture the coats.
3.6.1.1. Stitches, seams and stitchings. The stitch, seam and
stitching types specified in Table I shall conform to
FED-STD-751. The number of stitches per inch as specified in
Table I indicates the minimum and maximum number permitted. All
overedge stitching and serging shall be done on serging machines
with a knife attachment properly set to trim the raveled edge
without cutting the material.
3.6.1.2. Thread breaks and ends of seams. The end of all seams
and stitching (stitch type 301), except ends of a continuous line
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business