MIL-DTL-29478A(MC)
of stitching, when not caught in other seams or stitchings, shall
be backtacked not less than 1/4 inch. The ends of a continuous
line of stitching shall be overlapped not less than 1/2 inch.
Thread breaks shall be secured back of the break not less than
1/2 inch.
3.6.2 Shade marking. The component parts of each coat cut from
one piece of the wool and lining material, including pairs of
sleeve linings and underarm shields when not cut from ends, shall
be shade marked to ensure uniform shade and size throughout the
garment. Any method of shade marking may be used except:
a.
Corrosive metal fastening devices.
b.
Sew-on shade tickets.
c.
Adhesive type tickets where adhesive causes
discoloration or whose adhesive mass adheres to the material upon
removal of the tickets.
TABLE I.
Manufacturing requirements.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
1
Cutting.
a. Cut coats in strict accordance
with patterns furnished by the
Government.
b. Cut all materials in the
direction of the warp as indicated by
the directional lines on the
patterns.
c. Cut all scarlet wool parts of the
coat from one piece of the basic
material.
d. Cut the strapping for the
shoulder loops from basic material in
the direction of the warp, 2-3/4
inches long, and of sufficient width,
so that the finished loops will be
5/8 + 1/8 inch wide.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business