MIL-DTL-29479A(MC)
fused to the basic material as recommended by the supplier of the
fusible.
3.3.10 Hook and eye. A hook shall be attached to the left
waistband and an eye shall be attached to the right waistband
through a suitable reinforcement. The finish shall be nickel
plate.
3.4. Design. The slacks shall be the Marine Corps design shown
on Figures 1 and 2, having a two-piece waistband with button
closure, with hook and eye, 1/8 inch top side pockets, outlet at
the seat seam, front fly with slide fastener and slightly tapered
legs with unhemmed overedged bottoms.
3.5. Patterns. Standard patterns to be used to cut working
patterns will be furnished by the Government. The patterns allow
1/2 inch seam allowance for all seams, except as otherwise
indicated herein. The working patterns shall be identical to the
government patterns. Neither the government patterns nor the
working patterns shall be altered in any way.
3.5.1 List of pattern parts. The slacks shall be cut from the
materials specified herein in accordance with the pattern parts
indicated below:
ITEM
PATTERN NOMENCLATURE
NO. OF CUT PARTS
Material:
Basic
1
Front
2
2
Back
2
3
Left waistband
1
4
Right waistband
1
5
Left fly
1
6
Right fly
1
7
Front pocket bearer
2
8
Front pocket facing
2
Material:
Interlining (fusible)
9
Left fly
1
10
Left waistband
1
11
Right waistband
1
Material:
Lining (class 2 only)
12
Front (use item 1)
2
13
Back (use item 2)
2
7
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business