MIL-DTL-29479A(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH TYPE
BOB/
NO
OPERATION
TYPE
STCH/IN
NDL
LPR
12 Join outseams.
Finished appearance. Outseams shall
be carefully joined with notches
matching and without twists, puckers
or pleats. The seams shall start and
finish evenly and lie smooth and
flat.
a. Join the outseam with a 1/2 inch
301
SSa-1
12-14
30/3
30/3
seam, matching the notches as
or
indicated by marks on the patterns,
401
SSa-1
12-14
30/3
30/3
joining the back pocket bearer to the
front at the side seam and catching
the side pocket stay with its bottom
end turned up (if not previously
caught in overedge operation) (see
operation 9.a).
b. Spread open the outseams from top
edge of slacks to bottom and press
smooth and flat with a heated
pressing machine with the pocket stay
folded and pressed flat over the open
seam.
13 Finish side pockets.
a. Turn under the back edge of side
301
SSc-1
12-16
50/3
50/3
pocket and position in line with the
and
folded edge of the stay piece and
301
SSe-2
12-16
50/3
50/3
stitch pocket to stay piece 1/4 inch
to 3/8 inch from edge along the side
seam allowance. Continue stitching
along the side seamed edge of pocket
to folded edge of pocket and securely
backstitch end of stitching.
14 Make waistband.
Finished appearance. The two piece
waistband shall be constructed with
left and right parts. Each part
shall consist of one ply of basic
material and one ply of interlining.
The left waistband shall have a
pointed front end and the right
waistband shall have a square end.
The center back of the waistbands
shall have square ends.
a. Overedge stitch the inside raw
503
EFd-1
8-10
70/2
70/2
edge of left and right waistbands,
or
and interlinings.
504
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business