MIL-DTL-29479A(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH TYPE
BOB/
NO
OPERATION
TYPE
STCH/IN
NDL
LPR
b. Fold the left waistband in half
301
SSe-2
12-14
50/3
50/3
lengthwise, face to face with ends
(a)
even and notches matching. Join the
plies together at the pointed end
with a 1/4 inch seam, starting at the
notches, forming the pointed end and
stitching up to the folded edge.
Finish the square end of left
waistband with a 1/4 inch seam,
turning up 1/4 inch of raw edge and
seaming across the width of the
waistband through all plies to close
end.
c. Fold the right waistband in half
301
SSe-2
12-14
50/3
50/3
lengthwise face to face with ends
(a)
even. Finish each square end with a
1/4 inch seam, turning up 1/4 inch of
raw edge and seaming across the width
of the waistband through all plies to
close the end.
d. Trim the excess material at each
301
SSe-2
12-14
50/3
50/3
end to 1/8 inch from the seams. Turn
(b)
the right and left waistbands,
forcing out the corners and point
completely. Edgestitch 1/16 inch
from the seamed edges at the pointed
and squared ends.
e. Continue to edgestitch along the
301
OSf-1
12-14
50/3
50/3
length of the waistband 1/16 inch
from the upper folded edge.
f. The edge stitching may be
performed continuously with the top
stitching on the outside of the
waistband in operation 19.a.
15 Join inseams.
a. Match notches at front and back
301
SSa-1
12-14
50/3
50/3
of inseam and join with a 1/2 inch
or
seam from notch to bottom.
401
50/3
50/3
b.
Press inseam open and flat.
16 Make left fly.
Finished appearance. The left fly
shall finish smooth and flat without
twists, puckering or distortion. The
overedge stitching shall be securely
caught in the fabric.
15
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business