MIL-DTL-29384B(MC)
A-A-50198. The color of the gimp shall be scarlet shade W, cable
No. 66040, and shall show good fastness to wet (dry) cleaning.
3.3.7 Buttons. The buttons shall be metal, gold plated,
insignia, officers' design, 22-line, regular shank, conforming to
type I, style 4, class 4, subclass 1 of MIL-DTL-3461 (see DoD
Standard Shades for Buttons 1966).
3.3.7.1. Toggles, ring. The insignia buttons specified in 3.3.7
shall be secured to the vest with ring type toggles conforming to
the requirements of MIL-DTL-3461.
3.3.8 Labels. Each vest shall have an identification label and
a size label conforming to DDD-L-20 as specified herein. The
vest is intended to be dry cleaned, therefore, the labels shall
show fastness to dry cleaning.
3.3.8.1. Identification label. The identification label shall be
type VI, class 1 of DDD-L-20 and shall measure not less than
2-1/2 by 1-1/2 inches. The content and format shall be as
follows:
Nomenclature:
Name of contractor:
Wool Products Act information
NOTE: Size of characters for "Name of contractor" shall be minimum 6 point, approximately
1/16 inch.
3.3.8.2. Size label. The size label shall be type VI, class 2 of
DDD-L-20 and shall measure not less than 1-1/2 inches by 1 inch.
The label shall consist of the numerical size designation
specified in 1.2, followed by the letter S, R or L for Short,
Regular or Long, respectively, as shown by the following example:
14 R
3.4. Design. The vest shall be in the U.S. Marine Corps design
shown on Figures 1 through 3 (see 6.4), a fully lined, four
button, single breasted vest with four worked eyelets in the left
front for detachable buttons, back waist darts, two-piece back,
and shawl type lapel.
3.5. Patterns. Standard patterns will be furnished to the
contractor by the Government. The standard patterns shall not be
5
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business