MIL-DTL-29384B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/I
NDL
LPR
N
Stitch bridle tape to lapel.
8
(cont'd)
b. Stitch the tape through the
301
SSav-2
12-16
A
A
front of the vest evenly, smoothly
and with normal tension, holding
the tape taut and working in 1/2 to
5/8 inch fullness along the
breakline. The tape shall be
stitched 1/16 inch from each edge.
9
Make eyelets in left front.
Finished appearance. The eyelets
shall be worked with the purling on
the outside of the front, and shall
finish with 1/8 inch diameter
opening. All stitches shall be
securely caught in the fabric. The
center of the eyelets shall be
uniformly 1/2 inch minimum and 5/8
inch maximum from the finished
front edge of the vest and shall be
evenly spaced.
a. Mark the left front in
accordance with marks on pattern
for the location of four worked
eyelets.
b. Make an eyelet at each mark on
Eyelet
20 per
A
A
the left front, through the front
eyelet
(silk) (silk)
and interlining.
(min)
10
Stitch lining, for eyelet opening,
to facing.
a. Position lining for eyelet
301
SSe-2
10-14
A
A
opening on outside of left front
(a)
(silk) (silk)
facing with edge of facing and
lining even, and with notches
matching. Switch lining to facing
with a 3/8 inch seam extending the
distance between the upper and
lower notches.
b. Extend the depth of the notches
301
SSe-2
10-14
A
A
up to the lining facing seam. Turn
(b)
lining to the underside of the
facing and edgestitch 1/16 to 1/8
inch from the seamed edge.
10
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business