MIL-DTL-29384B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/I
NDL
LPR
N
Join neck.
15
(cont'd)
b. Spread open the neck facing
joining seam and press smooth and
flat.
c. Complete the closing of the
301
SSa-1
10-14
A
A
neck extension at the front edge
with 1/4 inch seam, catching the
ends of the neck seam in the
stitching.
d. Turn each front right side out,
Hand
through their respective shoulder,
or
forcing out the seams. Baste the
101
4-6
A
A
fronts along the front, bottom and
armhole edges.
e. Press fronts smooth and flat
with a heated pressing machine.
16
Finish front.
Finished appearance. Fronts shall
finish smooth and flat without
distortion. The edge stitching
shall be of uniform width without
twisting, pleating or puckering and
shall finish smooth and flat.
a. Edgestitch the vest along the
301
SSe-2
12-16
A
A
armhole, front and bottom edges
(b)
(silk) (silk)
1/16 inch from each seamed edge.
b. Press the edges of lapel, top
front and bottom edges of vest
smooth and flat with a heated
pressing iron or pressing machine,
removing the fullness. Turn lapel
back and crease along the breakline
smooth and flat.
c. Tack the upper and lower
301
SSa-1
12-16
A
A
rounded corners of the lapel to the
(silk) (silk)
fronts, through all plies, in line
with the edge stitching for a
distance of approximately 1 inch.
14
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business