MIL-DTL-29394C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
Make watch pocket and attach
4
combination label. (cont'd)
d. The watch pocket may be joined by
516
SSa-2
12-14
70
70
seaming and overedge stitching the
or
raw edges together in one operation.
517
5
Overedge stitch seams.
a. The raw edges of the seam
503
EFd-1
8-10
70
70
allowances of the skirt shall be
or
neatly overedge stitched.
504
NOTE: Care shall be exercised during
the overedging operation to ensure
that no seam allowance is reduced by
more than 1/16 inch.
6
Pink seams and bottom edge of lining.
a. The raw edge of the seam
allowances and raw edges at the
bottom of the front and back lining
shall be neatly and evenly pinked
with the points of the pinking 1/8
inch in depth.
7
Join back parts.
Finished appearance. The backs shall
be joined without gathers, puckers or
pleats.
a. Position the back parts with
301
SSa-1
10-14
A
A
edges even and join together at the
center back with a 3/4 inch seam from
the bottom edge of the skirt to 7-1/2
inches below the top of waistline.
b. Press the center back seam smooth
and flat with a heated pressing iron
or pressing machine.
8
Join front and back parts.
a. Join the front and back parts of
301
SSa-1
10-14
50
50
skirt at the side seams with a 1 inch
seam allowance and with notches
matching.
b. Spread open side seams and press
smooth and flat with a heated iron or
pressing machine.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business