MIL-DTL-29394C(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
18 Make buttonholes.
Finished appearance. The buttonholes
shall be clean cut, well made and
correctly positioned. The stitching
shall be securely caught in the basic
material. The buttonholes shall be
well worked over gimp to fit 27-line
buttons. The purling of the
buttonholes shall be on the outside
of the waistband.
a. Make a 3/4 inch long horizontal,
Button-
44-50
0
0
eyelet end, taper-bar type buttonhole
hole
per
through the center of the pointed and
squared ends of waistband with the
button-
inside purled edge of the eyelet 1/2
hole
to 5/8 inch from the finished ends to
(incl.
waistband.
tack)
19 Clean skirt.
a. All ends of stitching shall be
trimmed and the loose threads removed
from skirt. Pull and remove any
basting threads.
b. Any spots, stains and shade
tickets or markings shall be removed
without injury to the material.
20 Press skirt.
a. The entire skirt shall be pressed
smooth with a heated pressing iron or
steam pressing machine. Press marks
and gloss shall be removed.
21 Sew on buttons.
a. Close the slide fastener and mark
the inside and outside ends of
waistband with the location for
sewing on the buttons to correspond
with the eyelet of buttonholes.
b. The buttons shall be positioned
to engage with the eyelet end of
buttonholes, so that on the finished
skirt, the ends of the waistband lie
smooth and flat without twisting,
bulging, or other distortion.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business