MIL-DTL-29395B(MC)
Table III.
Test methods.
Reqmt.
Test
No. det.
Results
Components Characteristics
para.
method
per
reported as
S/unit
Lining
Material identification
3.3.3
1530
1
Pass or fail
Weight-oz/sq. yd.
3.3.3
5041
5
Pass or fail
Breaking strength-lbs:
5
Average of the
- warp
3.3.3
5100
five det. in each
- filling
direction to the
nearest 1.0 lb.
Tearing strength-lbs:
Average of the
- warp
3.3.3
5134
5
five det. in each
- filling
direction to the
nearest 1.0 lb.
Yarns per inch (min)
Average of the
- warp
3.3.3
5050
5
five det. in each
- filling
direction
Shrinkage
3.3.3
See 1/
1
Pass or fail
Weave
3.3.3
Visual
1
Pass or fail
Acidity (ph)
3.3.3
2811
5
Average of the
five det.
1/
Determination of shrinkage. Shrinkage shall be determined
in accordance with Method 5558 except that the specimen
shall be 22 inches by 22 inches without slits, soaked for
one hour, and if an extractor is not available, the excess
water shall be removed by wrapping the specimen in a towel
or similar material and squeezed by hand. Wringing by hand
or passing the specimen between squeeze rollers is
prohibited. The extracted specimen shall be dried by
pressing at a temperature not to exceed 275°.
5.
PACKAGING
5.1. Packaging. For acquisition purposes, the packaging
requirements shall be as specified in the contract or order (see
6.2). When actual packaging of material is to be performed by
Department of Defense (DoD) personnel, these personnel need to
contact the responsible packaging activity to ascertain
requisite packaging requirements. Packaging requirements are
maintained by the Inventory Control Point's packaging activity
within the Military Department of Defense Agency, or within the
Military Department's Systems Command. Packaging data retrieval
is available from the managing Military Department's or Defense
27
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business