MIL-DTL-29395B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
22 Attach hook and eye.
Finished appearance. In the finished
trousers, when hook and eye is
engaged, the closure shall not bulge,
pucker or twist.
a. Position the hook at the center
(1/4 inch off center tolerance) of
the left waistband with the rolled
edge of hook aligned with the slide
fastener scoops. Attach hook to left
waistband through a suitable
reinforcement.
b. Position the eye at the center of
the right waistband aligned with
slide fastener scoops and to
correspond with hook and left
waistband. Attach eye to right
waistband through a suitable
reinforcement.
23 Topstitch waistband.
Finished appearance. The waistband
shall be sewn on smoothly and evenly
and shall have a flat appearance
throughout, without gathers, puckers,
pleats or other distortions either in
the waistband, front part or back
part, and shall be even in width
along the entire length. The
waistband shall be 1-3/8 ± 1/8 inches
wide.
a. Topstitch the waistband to the
301
BSr-2
12-14
50/3
50/3
slacks 1/16 inch from the lower
(a)
folded edge, catching the overedge
stitched portion of waistband in the
stitching, and with the stitching
extending the entire length of the
waistband.
24 Bartack fly.
Finished appearance. The bartacks
shall be properly positioned and
correctly placed to reinforce the
points of strain.
22
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business