MIL-DTL-29395B(MC)
TABLE II.
Finished measurements.
1/
Inseam length 4/
Waist 2/ Hips 3/
Short
Regular
Long
Knee 5/ Bottom 6/
Size
(inches) (inches) (inches) (inches)
(inches) (inches) (inches)
X0
22-1/2
35
32
34
36
19
16-1/2
2
23-1/2
36
32
34
36
19
16-1/2
4
24-1/2
37
32
34
36
19-1/2
17
6
25-1/2
38
32
34
36
19-1/2
17
8
27
39-1/2
32
34
36
20
17-1/2
10
28-1/2
41
32
34
36
20
17-1/2
12
30
42-1/2
32
34
36
20-1/2
18
14
32
44-1/2
32
34
36
20-1/2
18
16
34
46-1/2
32
34
36
21
18-1/2
18
36
48-1/2
32
34
36
21
18-1/2
1/
Tolerance on all measurements shall be ± 1/2 inch.
2/
Waist. Twice the measurement taken in center of waistband
from folded edge to folded edge.
3/
Hips. Twice the measurement taken from folded edge to
folded edge 7 inches from bottom of waistband.
4/
Inseam. Length measurement taken along inseam from crotch
seam to unfinished bottom of legs.
5/
Knee. Twice the measurement taken from folded edge to
folded edge across the width of slack leg at a point up
from unfinished bottom of leg as follows: Short 19-1/2 (±
1/4) inches; Regular 20-1/2 (± 1/4) inches; Long 21 (± 1/4)
inches.
6/
Bottom. Twice the measurement taken from folded edge to
folded edge across unfinished bottom of leg.
3.8. Workmanship. The finished slacks shall conform to the
quality and grade of product established by this specification.
3.9. Recycled, recovered, or environmentally preferable
materials. Recycled, recovered, or environmentally preferable
materials should be used to the maximum extent possible provided
that the material meets or exceeds the operational and
maintenance requirements, and promotes economically advantageous
life cycle costs.
25
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business