MIL-DTL-29395B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
24 Bartack fly.
(cont'd)
a. Bartack the bottom end of the fly Bartack
21-28
0
0
horizontally through all plies at the
per
juncture of the crotch seam and fly
bartack
(see Figure 2).
b. Bartack the inside front edge of Bartack
21-28
0
0
right fly to back of left fly with a
per
horizontal bartack. Bartack shall be
bartack
1 ± 1/4 inch from bottom folded point
of right fly.
c. Bartacks shall be 3/8 to 1/2 inch
long and shall be stitched through
all plies of material at the point of
bartacking.
25 Finish slack bottoms.
a. Overedge stitch or pink the slack
503
EFd-1
8-10
70/2
70/2
bottoms.
or
504
26 Make buttonhole on waistband.
Finished appearance. The buttonhole
shall be clean cut, well made and
correctly positioned. The stitching
shall be securely caught in the basic
material. The buttonhole shall be
well worked over gimp to fit a
27-line button. The purling of the
buttonhole shall be on the outside of
the waistband.
a. Make 3/4 inch long horizontal,
Button-
44-46
0
0
eyelet-end, taper-bar type buttonhole hole
per
through the center of the pointed end
button-
of waistband with the inside, purled
hole
edge of the eyelet 1/2 to 5/8 inch
(incl.
from the finished ends to waistband.
tack)
27 Clean slacks.
a. All ends of stitching shall be
trimmed and the loose threads removed
from slacks. Pull and remove any
basting threads.
b. Any spots, stains and shade
tickets or markings shall be removed
without injury to the material.
23
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business