MIL-DTL-29395B(MC)
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with the provisions
set forth in MIL-STD-656.
4.3. First article inspection. When first article is required,
inspection shall be made of a completely fabricated pair of
slacks for all provisions in this specification.
4.4. Conformance inspection.
4.4.1 Testing of components. Testing of components shall be in
accordance with the applicable subsidiary specifications and
standards to the extend applicable, except that this
specification shall govern in the event of conflict. The method
of testing shall be as specified in FED-STD-191, wherever
applicable. Testing shall be performed on components listed in
Table III for characteristics noted.
4.4.2 In-process inspection. Inspection shall be performed
during the manufacturing of the end item to ascertain that the
operations are performed as specified herein. The Government
reserves the right to determine the acceptability of
construction methods not performed in accordance with specified
requirements for operations or subassemblies.
4.4.3 Examination of the end item. Samplings and examination
of the end item shall be performed for dress (D) slacks in
accordance with the provisions of MIL-STD-656.
4.4.3.1. Finished measurement examination. The provisions for
the finished measurement examination of the finished slacks
shall be as specified in MIL-STD-656 and as outlined in 3.7.
26
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business