MIL-DTL-29478A(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
b. Position the polyester twill
301
SSa-1
10-14
A
A
cloth and buckram interlinings for
(each
the collar with all edges even, and
edge)
seam together 1/8 to 3/16 inch from
the edges.
19 Pipe outer ply of collar.
Finished appearance. The piping
shall extend at the lower and side
edges of the outer ply and shall be
uniformly stitched without twists,
gathers, puckers, or pleats.
a. The outer ply of the collar shall
be made of one ply of material
specified in 3.3.2, piped with
material specified in 3.3.4.
b. Seam a 5/8 to 3/4 inch wide strip
301
SSaa-1
10-14
A
A
of piping to outer ply 1/8 inch from
(silk)
(silk)
sides and lower edge.
c. Turn back the piping and outer
301
SSa-1
10-14
A
A
ply, uniformly working the folded
(silk)
(silk)
edge of the piping beyond the edges.
Topstitch the outer ply uniformly
3/16 inch from the folded edge of
piping.
20 Assemble collar and make collar
extension tab.
Finished appearance. The collar
shall be assembled without twists,
gathers, puckers, or pleats.
a. Position the interlining assembly
Hand
2-3
C
on the inside of the outer ply under
(silk)
the unattached edge of piping. Tack
all the raw edges of piping to the
polyester twill interlining, making
the outer ply form a smooth and snug
fit.
b. Fold the upper raw edge of the
Hand
2-3
C
outer collar over the interlining and
(silk)
tack to the polyester twill cloth.
20 Assemble collar and make collar
extension tab. (cont'd)
c. Press the collar smooth and flat
with a heated pressing iron or
pressing machine.
20
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business