MIL-DTL-29479A(MC)
maintenance requirements, and promotes economically advantageous
life cycle costs.
4.
VERIFICATION
4.1. Classification of inspection. The inspection requirements
specified herein are classified as follows:
a.
First article inspection (see 4.3).
b.
Conformance inspection (see 4.4).
4.2. Inspection conditions. Unless otherwise specified, all
inspections shall be performed in accordance with provisions set
forth in MIL-STD-656.
4.3. First article inspection. When first article is required,
inspection shall be made of a completely fabricated pair of
slacks for all provisions in this specification.
4.4. Conformance inspection.
4.4.1 Testing of components. Testing of components shall be in
accordance with the applicable subsidiary specifications and
standards to the extent applicable, except that this
specification shall govern in the event of conflict. The method
of testing shall be as specified in FED-STD-191, wherever
applicable. Testing shall be performed on components listed in
Table III for characteristics noted.
23
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business