MIL-DTL-29479A(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH TYPE
BOB/
NO
OPERATION
TYPE
STCH/IN
NDL
LPR
d. Stitch left fly to left front,
301
SSa-1
12-14
50/3
50/3
starting at the top and continuing
with a curve to the bottom notch.
The stitching shall be 1-1/4 ± 1/8
inches from the front edge of the
fly.
e. Position right fly assembly on
301
SSa-1
12-14
50/3
50/3
right front with overedged edges and
top raw edges even. Join right fly
to front with 1/2 inch seam.
f. Press right and left fly flat
with heated pressing iron, with the
seam toward the side seam.
g. Edgestitch 1/16 inch from the
301
LSq-2
12-14
50/3
50/3
front seamed edge, through the slide
(b)
fastener tape and the placket.
19 Join waistband to slacks.
Finished appearance. The waistband
shall be joined without twists,
puckers, pleats or distortions. The
back square ends of the waistband
shall be even with the seat seams.
a. Position the left waistband on
301
SSa-1
12-14
50/3
50/3
the left front, face to face, with
the notch and finished left fly
opening matching. Join together with
a 3/8 inch seam.
b. Position the right waistband on
301
SSa-1
12-14
50/3
50/3
the outside of slacks, face to face,
with square end and folded edge of
placket even. Join together with a
3/8 inch seam.
20 Attach hook and eye.
Finished appearance. In the finished
slacks, when the hook and eye is
engaged, the closure shall not bulge,
pucker or twist.
a. Position the hook at the center
(1/4 inch off center tolerance) of
the left waistband with the rolled
edge of hook aligned with the slide
fastener scoops. Attach hook to left
waistband through a suitable
reinforcement.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business