MIL-DTL-82122D(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE STCH/IN
NDL
LPR
3
Shade marking.
a. Mark or ticket all component
parts (see 3.6.2) cut from one piece
of basic and lining materials; pairs
of sleeve linings, when cut from
ends; and the two parts of the under
collar to insure uniform shade and
size throughout the jacket.
b. The use of tickets with metal
fastening devices is prohibited on
rayon lining.
Make jacket front interlining.
4
a. Seam the front and side front
together 3/8 inch from the edge.
b. Spread the seam open and press
flat with a heated pressing iron.
5
Make shoulder straps.
Finished appearance. The shoulder
straps shall be uniformly stitched
and shall finish smooth and flat
without twists, gathers, puckers,
pleats, or raw edges. The eyelets
shall be well worked with the purling
on the outside of shoulder straps and
shall finish with a 1/8 inch diameter
opening with the purled edge of
eyelet away from the opening. The
straps shall be uniform in size and
shape with the seams worked out to
the edge.
a. The shoulder straps shall be made
of two plies of basic material.
b. Seam the two plies together 3/16
301
SSe-2
10-14
A
A
inch from edges at the front, back
(a)
(silk)
and collar end. Evenly trim all
or
edges of the strap for proper
(cotton)
turning.
c. Turn straps, working the seams
301
SSe-2
10-14
A
A
out to the edges. Topstitch strap
(silk)
uniformly 1/8 inch from seamed edges.
d. Make one eyelet in each strap
Eyelet
20 per
A
A
midway between the back and front
eyelet
(silk)
edges and with the edge of the eyelet
(min.)
(black)
opening 5/8 to 3/4 inch from the
rounded end of the straps.
11
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business