MIL-DTL-82122D(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE STCH/IN
NDL
LPR
Make shoulder straps.
5
(cont'd)
e. Press the straps smooth and flat
with a heated pressing iron or
pressing machine.
Make under collar.
6
a. The under collar assembly shall
consist of two pieces of permanent
finish interlining material.
b. Join the two halves of the under
301
SSa-1
10-14
A
A
collar with a 3/8 inch seam.
c. Spread the seam open and press
flat with a heated pressing iron.
d. Join the two halves of the
301
LSa-1
10-14
A
A
interlining together with a 3/8 inch
lap seam.
e. Mark the breakline of the under
301
SSa-1
10-14
A
A
collar with collarstand marker.
Position the interlining on the under
collar with lower edges even and join
together at the mark for the
breakline. In the finished jacket,
the under collar stand shall measure
1-1/8 ± 1/8 inches at the vertical
center.
f. Quilt interlining to under collar
103
SSm-4
4-6
A
A
with four to five rows of blind
or
stitching.
5
g. Press under collar smooth and
flat with a heated pressing iron or
pressing machine.
h. Mark and trim under collar in
accordance with the shape of pattern.
Trim interlining 1/8 to 3/16 inch
back from the lower neck edge of the
under collar.
i. Stitch under collar and
301
OSa-1
10-14
A
A
interlining together with a row of
(silk)
stitching 1/2 ± 1/8 inch from top
(outer) and side edges (ends).
12
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business