MIL-DTL-29395B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
12 Attach hip pocket, flaps and label.
(cont'd)
m. The depth of the pockets shall be
5 to 5-1/2 inches when measured on
the inside of pocket from top edge of
cord facing to bottom.
n. The finished pocket opening
(after bartacking) shall not exceed
the hip pocket flap.
o. On the finished slacks, the
pocket flaps shall be 2-1/8 ± 1/4
inches at center measured from seam
to center point.
13 Join outseams.
Finished appearance. Outseams shall
be carefully joined with notches
matching and without twists, puckers
or pleats. The seams shall start and
finish evenly and lie smooth and
flat.
a. Join the outseam with a 1/2 inch
301
SSa-1
12-14
30/3
30/3
seam, matching the notches as
or
indicated by marks on the patterns.
401
SSa-1
12-14
30/3
30/3
b. Spread open the outseams from top
edge of slacks to bottom and press
smooth and flat with a heated
pressing machine.
14 Attach ornamental stripes (class 1).
Finished appearance. Ornamental
stripes shall be set on the slacks
from top edge of fronts to bottom
edge of legs, with the top end to
finish in the waistband seam. The
ornamental stripes shall be securely
and uniformly stitched, properly
positioned and shall finish without
distortion.
a. Position the ornamentation
301
SSat-2
10-14
A
A
centered on the outseam. Seam to
slacks from top to bottom 1/8 inch
from edge of ornamentation.
17
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business