MIL-DTL-29395B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
12 Attach hip pocket, flaps and label.
(cont'd)
h. Position the combination personal
301
LSbj-1
10-16
50/3
50/3
identification size instruction label
on the top of the right pocketing so
that on the finished slacks it will
face the wearer. No part of the
label printing shall be covered by
the waistband interlining curtain.
Stitch the label on all four sides
1/16 to 3/32 inch from the edges.
Stitching shall not be through
printing.
-or-
i. Stitch top edge of combination
301
LSa-1
12-16
0 or
0 or
personal identification size
50/3
50/3
instruction label to the lower edge
of the waistband lining above the
right hip pocket. The ends of
stitching need not be tacked provided
the stitching extends at least 1/2
inch beyond each side of label.
j. Securely bartack both ends of the
301
SSa-1
12-16
50/3
50/3
pocket opening through all plies of
(each
material.
end)
-or-
k. Operations 10.c, 12.a, 12.b and
101
12-16
50/3
12.c may be accomplished on an
or
automatic machine which sets the
A/3
flap, stitches, cuts and turns cord
facing in one operation. When this
machine is used, the bearer may be
trimmed to permit insertion into
machine and the recommended pocket
stay material may be used.
-and-
l. Raise stitch and joining seam of
301
12-16
0 or
0 or
the lower edge of pocket opening
50/3
50/3
through back of slacks and cord
facing only. Raise stitch the back
at upper edge of pocket opening
through all plies, closing the top of
the pocket. Securely tack both ends
of pocket opening.
16
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business