MIL-DTL-29396B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
a. Mark the right front for the
location of the seven eyelets for
removable insignia buttons to align
with the buttonholes on the left
front. The mark for the top eyelet
shall be in line with the right end
of collar and the remaining eyelets
shall be in vertical alignment with
the top mark.
b. Mark location of eyelet on
shoulder strap 5/8 inch from the
rounded piped edge and center at
shoulder strap.
65 Mark and make eyelets on right front
and shoulders. (cont'd)
c. Make an eyelet on the right front
Eyelet
22 per
A
A
at each mark through the facing. The
eyelet (silk)
eyelet cover on the inside of the
right front shall not be caught in
the stitching.
d. Make one eyelet at the mark on
Eyelet
22 per
A
A
each shoulder strap through all plies
eyelet (silk)
except the eyelet cover.
66 Clean jacket.
a. Pull all basting thread, trim and
remove any loose ends of thread, and
remove any spots, stains and tickets
without injury to the material.
b. Buttonholes at front closure
shall be examined for exposure of
jacket front interlining cloth. The
exposed interlining shall be colored
with a reddish indelible ink.
67 Press jacket.
a. The jacket shall be well pressed
throughout with a heated pressing
iron or pressing machine of a type
suitable to obtain the desired shape
and appearance in accordance with
good manufacturing practices.
b. Press the fronts smooth and flat,
straightening and shaping the front
edges and working the fullness
towards the chest. Care shall be
exercised in pressing the fronts so
that the bottom edges are even.
40
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business