MIL-DTL-29396B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
a. Position and securely sew the
Hand
16 per
C
hook to the left end and the eye to
hook
(silk)
16 per
the right end of the collar. The
hook and eye shall be positioned with
eye
their front edges even with the
respective front ends of the collar
and securely sewn to the collar at
the top and bottom of the forward
edge of the hook and eye. The
stitching on each side shall not be
more than 3/8 inch from the front end
of collar through the individual
holes at the rear of the hook and
eye.
64 Finish collar.
a. Securely tack the lower corners
Hand
8-10
C
of the collar to the jacket.
(silk)
b. Turn under the end and top edge
Hand
8-10
C
of the lining at the right and left
(silk)
end of the collar and position the
folded edge of the lining under the
hook. Fell the folded end of the
collar lining to the end of the
collar and continue felling along the
top folded edge of the end to the
stitching joining the lining to the
collar.
c. Turn under and fell the lower
Hand
8-10
C
edge of the collar lining to the
(silk)
jacket from end to end, catching the
turned-under portion of the lining at
the right and left end in the
felling.
d. The lower edge of the collar
Hand
8-10
C
lining may be basted to jacket prior
(silk)
to felling.
e. Turn back collar lining extension
tab and hand fell directly behind
eyes.
65 Mark and make eyelets on right front
and shoulders.
Finished appearance. The eyelets
shall be worked with the purling on
the outside of the jacket, and shall
finish with 1/8 inch diameter
openings. All stitches shall be
securely caught in the fabric.
39
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business