MIL-DTL-29396B(MC)
Manufacturing requirements - Continued.
TABLE I.
SEAM/
STCH
STCH
BOB/
NO
OPERATION
TYPE
TYPE
STCH/IN
NDL
LPR
61 Fell sleeve lining at armhole.
(cont'd)
NOTE: It is required that the
simulated hand felling produced by
machine shall be equal to or better
than the hand felling.
62 Fell facings.
a. Fell the facing to the piping at
Hand
8-10
C
the bottom edge of the jacket,
(silk)
starting at the bottom edge of the
lining and continuing along the back
and bottom edges of facing to the
front edge of jacket, catching the
eyelet cover in the felling.
b. Fell the folded edge of the
Hand
8-10
C
facings to the piping along the top
(silk)
edge from collar to notch to front
edge of jacket.
c. Fell the eyelet cover to the left
Hand
8-10
C
front facing along the bottom edge of
(silk)
cover.
d. Tack the eyelet cover to the left
Hand
4-6
C
front facing along the folded edge of
per
(silk)
lining. Place one tack midway
tack
between the second and third eyelet
from the top, and one tack midway
between the fourth and fifth eyelet
from the top.
63 Sew hook and eye to collar.
Finished appearance. The hook and
eye shall be positioned to properly
engage each other, effecting a flat,
smooth closure at the front of collar
without misalignment.
38
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business