MIL-DTL-82126D(MC)
shall be black, shade BT, cable No. 62001 (see DoD Standard
Shades for Buttons 1966).
3.3.8.1. Automatic button sewing. If an automatic machine which
sews and shanks (wraps) the buttons in one operation is used, the
thread shall be waxed.
3.3.9
Labels.
3.3.9.1. Label. Each skirt shall have an identification label
conforming to type VI, class 1 and 2 of DDD-L-20. The skirts are
intended to be dry cleaned and the label shall show fastness to
dry cleaning. The content and format shall be as follows:
Nomenclature: (item description)
Name of contractor:
Wool Products Act information:
3.3.9.2. Size label. The size label shall conform to type VI,
class 2 of DDD-L-20 except the stock number is not required. The
inscription on the size label shall conform to MIL-STD-984; Table
II Height Ranges, Table III Body measurements for Marine Corps
and Figure 2.
3.3.10 Waistband interlining. The waistband interlining material
shall be twill, polyester and cotton conforming to class 1, of
A-A-52106. A fusible waistband interlining of suitable material
may be substituted for the polyester and cotton twill.
3.4. Design. The skirt shall be the U.S. Marine Corps design
shown in Figures 1 and 2, a gore style made with a three piece
front, two piece back panels, fully lined, and an opening at the
top of the center back with a slide fastener closure, and a one
piece set-on waistband with both ends to fasten with buttons and
buttonholes at the back opening. The skirt shall have a center
back kick pleat and the hem shall be pinked. A watch pocket
shall be placed on the right side at the waistband seam.
3.5. Patterns. Standard patterns will be furnished to the
contractor by the Government (see 6.3). The standard patterns
shall not be altered in any way and shall be used only as a guide
for cutting the contractor's working patterns. The contractor's
working patterns shall be identical to the standard patterns.
Standard patterns show size, seam allowances, directional lines
for cutting, and are marked or notched for proper placement and
6
For Parts Inquires call Parts Hangar, Inc (727) 493-0744
© Copyright 2015 Integrated Publishing, Inc.
A Service Disabled Veteran Owned Small Business